Dual Needle Gauge
– Analog gauge
– White illuminated face
– Dual needle PSI monitoring
– 2 inch diameter
– Max 220PSI
R2,999.99
Digital LED Display
-52mm air pressure gauge with 7 colors LED’s readings of 5 pressure.
-The range of the sensors is from 0 psi to 220 psi. (or 0-20 Bar). can be switched between BAR -> PSI .
-High contrast PMVA LCD screen and high quality sensors with heat-resistant.
-Each sensor runs a pair of wires to/from the gauge.
-The sensors are full electronic, so there is no chance of a leak occurring in tubing going to inside your cab, as there is none! Only wiring.
-Try to avoid having the sensors located where water can accumulate, best place is the top of any air reservoir.
-7 Solid Color Settings will meet your requirement, no matter what color you want.
Product includes
1 x Digital air gauge
5 x Wire cables
1 x Quick Fitting
1 x Manual guide
R119.99
12V Auto Relay 40A + Wiring Harness
Relay load: 40A/12VDC
Contact Resistance: ≤ 100MΩ
Contact Material: Ag Alloy
Life Expectancy Electrical: 100;000 Operations
Life Expectancy Mechanical: 10;000;000 Operations (at 300 Operations/min)
Operate Time: ≤15ms
Release Time: ≤10ms
Insulation Resistance: 100MΩ/( 500VDC)
Temperature Range: -55°C ~+70°C
Humidity Range:35%~80%
Atmospheric Pressure:86~106KPa
R199.99
Pressure Switch 20amp (120/160)
-12 Volt
– 1/4 NPT Male Thread
– 120 PSI turn on / 160PSI turn off
Pressure switch is to be used with a relay. N.B Do not run an air air compressor directly off the switch.
R13,499.99
Air BFT Management Controller (Non–height)
Suitable for all air systems that require the ultimate performance and use of your air system
This unit is complete with the following features;
- Build in solenoid block
- Wheel height management, allowing for control of each wheel independently, front and rear or all four together
- Air Tank pressure setting
- Air Compressor control switch
- Three preset height settings
- Wired air pressure remote controller with LCD display
- Wireless Bluetooth function, allowing to be controlled via mobile App
- Can be configured to raise on start and descend on turn off of vehicle
- Menu page has multiple language options